Table of Contents
Advertisement
Functions & Installation 8. USB Port
8. USB Port
Connect a commercial USB flash drive to the TP3 memory port to use the following
features.
- Backup Controller information to a USB flash drive.
- Restore Controller information from a USB flash drive.
- Updating the software (Refer to: Operation 5.3.3 Update Software)
8.1 Cautions when using USB flash drive
- Although the port is a universal USB port, never connect anything other than a USB
- Insert a USB flash drive directly into the TP3 memory port.
- Insert and remove a USB flash drive slowly and surely.
- Do not edit the saved files by the editor.
- Do not use two USB flash drives at once.
8.1.1 Available USB Flash Drive
Use a USB flash drive that meets the following conditions.
- USB2.0 supported
- Without security function
9. Warning Sound (Beep)
The Teach Pendant beeps when the robot passes the singularity.
26
(Refer: Operation 5.2.1 Backup)
(Refer: Operation 5.2.2 Restore)
flash drive.
Operation is not guaranteed when there are cables or hubs between TP3 and a USB
flash drive.
Operation of the robot system after data restoration is not guaranteed.
USB flash drive with password input function cannot be used.
RC700-A option TP3 Rev.8
Advertisement
Table of Contents
