Husqvarna K 770 Dry Cut Operator's Manual page 39

Use a fuel mixture of gasoline and oil.
Noise emission to the environment label
as per EU and UK directives and
regulations. The guaranteed sound power
level of the product is specified in
Technical data on page 67 and on the
label.
Cutting equipment decal
A
A: Cutting blade diameter.
B: Maximum speed output.
C: Maximum blade thickness.
D: Bushing dimension.
Note:
Other symbols or decals on the product refer to
certification requirements for some markets.
Type plate
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
Huskvarna, SWEDEN
XXXXXXXXXXX
XXXXXXXXXXXX
861 - 005 - 22.04.2022
C
D D
B
Row 1: Brand, Model (X, Y)
Row 2: Serial No. with manufacturing date (Y, W, X):
Year, Week, Sequence No.
Row 3: Product No. (X)
Row 4: Manufacturer
Row 5: Manufacturer address
Rows 6–7: If applicable, EU type approval number or
Chinese MEIN number
Euro V Emissions
WARNING:
voids the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Tampering with the engine
39