Freestyle Libre 14 day In-Service Manual page 8

Start New Sensor
2 Start new sensor with reader
STEP 1
Press Home Button
to turn on reader.
NOTE: If using reader
for the fi rst time,
follow the prompts
to set date, time, and
target glucose range.
3 Start new sensor with app
STEP 1
Tap the scan button.
If you would like to use both your reader and your app during your sensor wear, scan the sensor fi rst with your reader and then
with your app.
After the 1-hour warm up period, the sensor can be worn for up to 14 days. Your sensor automatically stops working after 14 days
of data and must be replaced.
Work with your healthcare provider to choose and enter a custom target range on your reader.
STEP 2
Touch Start
10:23pm New Sensor.
No Active Sensor
Start New Start New Review Review
Sensor Sensor History History
STEP 2
Hold the top of your
iPhone near the Sensor.
Hold still until you
hear a tone and/or
feel a vibration. This
completes the scan.
Start New
Sensor
STEP 3
Hold reader
within 1.5 inches
(4 cm) of sensor
to scan it.
Sensor can be
used to check
your glucose
after 1 hour.
STEP 3
The Sensor can
be used to check
your glucose after
the startup period.
While the Sensor
is starting up, you
can navigate away
from the App.