Honda CRF125F 2021 Owner's Manual page 93

Installation:
• Reverse the removal procedure.
1. Install the side collars into the left and
right side wheel hub. Carefully fit the
brake disc between the pads to avoid
scratching them.
2. Insert the front axle shaft from the right
side, through the right fork leg and
wheel hub.
3. Tighten the front axle nut to the
specified torque.
Front axle nut torque:
62 N·m (6.3 kgf·m, 46 lbf·ft)
4. After installing the wheel, apply the
brake several times and then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
Check front brake adjustment (page 25).
If the torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
83