Main Fuse:
The main fuse (1) is located under the seat.
The specified fuse is:
15 A
1. Turn the ignition switch OFF before
checking or replacing the fuses to
prevent an accidental short-circuit.
2. Remove the seat (page 42).
3. Remove the starter magnetic switch (2)
from the ribs (3).
4. Disconnect the wire connector (4) of the
starter magnetic switch.
5. Pull out the fuse. If the main fuse is
blown, install the spare main fuse (5).
The spare main fuse is located under the
starter magnetic switch.
6. Reconnect the wire connector and install
the starter magnetic switch.
7. Install the seat.
If a fuse fails repeatedly, you likely have an
electrical problem. Have your motorcycle
inspected by your dealer.
92
(4)
(1)
(5)
(2)
(1) Main fuse
(2) Starter magnetic
switch
(3) Ribs
(3)
(4) Wire connector
(5) Spare main fuse