Konica Minolta CS-3 Operation Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Music Mixer
  5. CS-3
  6. Operation manual

Konica Minolta CS-3 Operation Manual

Regius console
Hide thumbs Also See for CS-3:
Table of Contents

Advertisement

Quick Links

Download this manual
REGIUS CONSOLE
CS-3
OPERATION MANUAL
CODE NO. 0862
No. 26-2, Nishishinjuku 1-chome, Shinjuku-ku, Tokyo 163-0512, Japan

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta CS-3

Summary of Contents for Konica Minolta CS-3

  • Page 1 REGIUS CONSOLE CS-3 OPERATION MANUAL CODE NO. 0862 No. 26-2, Nishishinjuku 1-chome, Shinjuku-ku, Tokyo 163-0512, Japan...

  • Page 2: Table Of Contents

    Before Examination..............28 Host Status Check Screen ............134 Selection of Operator ..............31 Printer Status Check Screen.............135 Patient Data Input (Input from CS-3)...........31 RIS Status Check Screen ............136 Patient Data Input (Search from Data Base).......32 Operator Selection Screen............138 Checking Patient Data ..............33 Examination History Screen............139...

  • Page 3: Foreword

    In this manual, safety precautions and operational procedures are described to allow the users of the CS-3 to be fully familiarized with the potential of the CS-3. The manual should be at all times be kept in a readily accessible place for easy reference. Should you loose this manual, please contact your Service Representative for the new one.
  • Page 4 Even with multiple cassette readers (REGIUS MODEL 170/190), the image read by any reader in the system will be displayed on the CS-3 by which the objective cassette was registered. This feature realizes highly reliable image identification as well as efficient use of readers.

  • Page 5: About This Manual

    About this Manual Be sure to read this chapter before using this manual. < 3 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 6 CS-3 Control Unit Implements control of the reader devices, image data processing and output of image data. CS-3 Control Unit can be interfaced to reader devices in the configuration where maximum one Upright Reader (REGIUS MODEL 350/370) and 16 REGIUS Cassette Readers (REGIUS MODEL 170/190) at a time.
  • Page 7 In this manual, the unnecessary area of the display may be trimmed away. Parenthesis in a sentence. The word in this mark shows that it is dis- Ex. "Ready" played in the touch panel of the CS-3 operation unit. The word in this mark shows that it is the Ex. [Complete] Button name of the button to be pushed or touched.
  • Page 8 About this Manual < 6 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 9: 1 Safety Precautions & Warnings

    Safety Precautions & When using the REGIUS Console CS-3, the cau- tions detailed in this chapter must be strictly fol- Warnings lowed in order to correctly use the device. < 7 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 10 Moderate damage or light injury WARNING CAUTION CAUTION (Damage is light) Damage to property only CAUTION NOTE : If the contents of this page are not legible, order a new manual. < 8 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 11 Data Handling The manufacturer of CS-3 cannot be held liable for the loss of important data such as patient's data as a result of installing the CS-3 at the facility. Cautions for Computer Virus Be careful not to introduce computer virus to the CS-3 whether it is used as stand alone or in connection to the network.
  • Page 12 Do not introduce water or other foreign objects into the CS-3. Do not introduce foreign objects such as water or other liquids, pins or clips into the CS-3: fire, electrocution or damage may result. In the event of accidental introduction of such foreign objects or substances into the unit, the power should be switched off immediately and the power plug disconnected from the power outlet.
  • Page 13 Conforms to UL, CSA, CE (EMC), CTICK, GS Conforms to VCCI Class B Conforms to FCC Part15 Class B NOTE : If the contents of this page are not legible, order a new manual. < 11 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 14 Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. NOTE : If the contents of this page are not legible, order a new manual. < 12 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 15 Momentary exposure to a Class 2 laser is not known to be harmful. NOTE : If the contents of this page are not legible, order a new manual. < 13 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 16 LASERPRODUKT DER KLASSE 2 SWEDISH / SVENSKA KLASS 2 LASERLJUS STIRRA INTE MOT STRÅEN LASERPRODUKT KLASS 2 NOTE : If the contents of this page are not legible, order a new manual. < 14 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 17 Conforms to UL, CSA, VDE, EC EMC Safety Regulations Conforms to FCC Class A, CISPR Class B, EC NOTE : If the contents of this page are not legible, order a new manual. < 15 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 18 El uso de instrumentos ópticos con el equipo láser puede incrementar el riesgo para la vista. NOTE : If the contents of this page are not legible, order a new manual. < 16 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 19 L'uso di apparecchi ottici, equipaggiati con raggi laser, aumenta il rischio di danni alla vista. NOTE : If the contents of this page are not legible, order a new manual. < 17 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 20 Ch.1 Safety Precautions & Warnings < 18 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 21 Operation The operation of CS-3 is described in this chapter. < 19 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 22: Ch.2 Operation

    The boarder of stitched images "Accession Number", "Requesting be attached can be selected. selected in "Composite Image Select" Doctor", "Requesting screen can be adjusted. Department", "Operator" can be input or amended. < 20 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 23 The boarder of stitched images "Accession Number", "Requesting be attached can be selected. selected in "Composite Image Select" Doctor", "Requesting screen can be adjusted. Department", "Operator" can be input or amended. < 21 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 24 Starting from be selected. examined on the examination "Print Format" and "Overlay" can this screen, browse or reprint can be check screen cab be modified. be set. implemented. < 22 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 25: Start Up

    Readers, Printers, Viewers, Servers, etc.) are properly connected to the CS-3 and switched on. Check that a floppy disk is not inserted in slot of the CS-3 Control Unit. If it is insert- ed, push the eject button to remove it. CS-3 will not start up with the floppy disk inserted.

  • Page 26: Shut-Down (Power Off)

    Shut-Down (Power OFF) The procedure for switching off the CS-3 power supply is described below. Switching off the CS-3 power supply may be done from the examination search screen or the examination list screen on the CS-3 Operation Unit (monitor).

  • Page 27: Using The Input Panel

    Touching the "Caps Lock" key will switch between time/date input column. upper and lower case characters. < 25 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 28 Ch.2 Operation < 26 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 29: 3 Sequence Of Examination

    Sequence of Examination This chapter describes the sequence of examina- tion using CS-3. < 27 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 30: Before Examination

    Examination List display the examination search screen and input the patient data. Note, however, Screen that initialization of examination using CS-3 is possible from only one initial screen. (When the examination search screen has been set as the initial screen) The [KONICAMINOLTA] button is displayed at the bottom left of the initial screen (examination search screen or examination list screen).
  • Page 31 Search or input of Selection of patient new patient data. data already regis- [OK] [OK] tered on the list Button Button [Perform] [Perform] Button Button Examination Starts Examination Starts < 29 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 32 Touching the [Multi images] or [Single Image] button enables change of format as required. Thus, comparison of images may be carried out using the multiple-image format and detailed examination of images carried out using the single-image format. < 30 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 33: Selection Of Operator

    On systems where examination data is input from CS-3 only, the examination search screen is usually set as the initial screen. Prior to examination, patient data for the patient to be examined is input using the input panel (or the CS-3 keyboard) on the CS-3 Operation Unit.

  • Page 34: Patient Data Input (Search From Data Base)

    The [Search] button is displayed only when the system configuration is set so that ous item. the patient data is searched from the data base in the higher device or CS-3. Where only one lot of Make selection by touching the patient data to patient data is be input and touch the [OK] button.

  • Page 35: Checking Patient Data

    ID-680 Series or Radiology Information System (RIS) does not include order, the examination body part/parameter selection screen is displayed. Following this screen: • Examination Body Part/ Parameter Selection p.34 Examination Body Part/ Parameter Selection < 33 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 36: Examination Body Part/Parameter Selection

    A yellow under line is dis- screen, parameters registered in orders by set parameters are sorted in the sequence in which played at the bottom of they are registered. the parameter button. Yellow < 34 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 37 [OK] button to move to the examination check screen. When the exam- ination check screen is displayed, insert the cassette again. < 35 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 38: Reserving Patient Data

    Once orders have been registered using the examination body part/parameter selection screen, examination may be initiated immediately; after registration of the examination body part/parameters additional patient data may be input or searched using CS-3, it is also possible to simply make a reservation on the examination list. Input patient data on the examination search p.31, 32...
  • Page 39 Position the reader device to match the patient. • If it is necessary to alter size, angle or position, use the panel switches on the reader device or touch the image display field on the CS-3 Operation Unit to select them on the detailed data selection screen.

  • Page 40: Exposure [Single-Image Format] Cassette Reader, Bar Code Registration

    This function is not available in the examination check screen (multiple- image format). • The [OK] button displays time remaining (secs.) until the order is confirmed automatically. < 38 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 41 • The image read from the cassette will be displayed in the image display field corresponding to the order "#1". • Each time the reading is completed, the reading order of each order will be descended. < 39 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 42 "Print Format" and "Overlay") cannot be modified once the order is reserved in the step Touch the image display field to change it after the reading is completed or the reading reservation is canceled. < 40 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 43: Exposure [Multiple-Image Format] Upright Position Reader

    CS-3 Operation Unit, select them on the detailed data selection screen. • For details of operation of the reader device, refer to "Upright Reader Operation Manual".

  • Page 44: Exposure [Multiple-Image Format] Cassette Reader, Screen Menu Selection

    LED indicator. • The cassette bar code will be displayed in the out individually for each selected order. order. Repeat steps to read the bar code for each order. < 42 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 45 Once the cassette is inserted into the reader, no operation may be carried out for the image. When the message shown right is displayed, touch [YES] to close the message. < 43 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 46 Setting Screen order list. (Print Format) Touch Touch Amending overlay p.118 Select the target Image Detailed Data Overlay Display Setting Screen order from the Field (Overlay) order list. Touch Touch < 44 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 47: Image Output [Single-Image Format] Output Per Order

    When outputting the image again even after the examination is completed, or out- Image Reference putting the image more than once, the second or later image will be output through after Examination (Output Again) the "Image Reference Screen". < 45 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 48: Image Output [Single-Image Format] Batch Mode Output Of All Orders

    Host), : mirrored indicating the image is mirrored or not. < 46 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 49: Image Output [Multiple-Image Format] Output Per Order

    Examination the edge of output film(image data when output to the : mirrored (Output Again) Host), indicating the image is mirrored or not. < 47 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 50: Image Output [Multiple-Image Format] Batch Mode Output Of All Orders

    : mirrored Host), indicating the image is mirrored or not. < 48 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 51: Image Erasing

    • Touching the [CANCEL] button will switch to the “Exam Check” screen without image abortion. Selected “Rejected Reason” will be controlled by the CS-3 administrator of each institute. Text strings displayed on the buttons can be edited using the User Tool.
  • Page 52 • Touching the [CANCEL] button will switch to the “Exam Check” screen without image abortion. Selected “Rejected Reason” will be controlled by the CS-3 administrator of each institute. Text strings displayed on the buttons can be edited using the User Tool.

  • Page 53: Image Substitution

    • The image of the order selected in step will be displayed in the image display field of the order selected in step Transfer of the image to the "skull A->P" order. < 51 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 54: Print Format

    For one image to two frames, a stamp will be positioned at one location. For two images to two frames, a stamp will be positioned for each frame. Refer to the page for “Detailed Setup” screen (Overlay). < 52 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 55 (When "AA" is selected) Touch the [Secondary] button. • Check the image to be output as a secondary image. • Image processing or ROI may be changed. < 53 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 56 • The relative positions of the two images are deter- mined by the order in which they are output (by touching the "OK" button). However, these posi- tions may be switched when the second image is output. < 54 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 57 If the examination is completed with only one image confirmed ([OK]), only the con- Detailed Data firmed image is output on one side of the film. Setting Screen (Print Format) < 55 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 58 • At this point, the image output is just set in the printer queue, not actually output to the printer. • The printer icon will remain displayed in the top left corner of the image display field. < 56 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 59 If the examination is completed with only one image confirmed ([OK]), only the con- Detailed Data firmed image is output on one side of the film. Setting Screen (Print Format) < 57 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 60: Examination Suspension

    " * " is displayed. Systems where a suspended examination is continued at a different location. In systems where the same examination list is displayed on multiple CS-3 units and examinations for which all photography has not been completed and may be carried out in another photography room, the following procedure should be followed to suspend examinations.
  • Page 61 The examination is displayed as suspended on a different ued in another room CS-3 to the one on which the examination was suspended. (on another CS-3), The list is no longer displayed on the CS-3 on which exami- orders for which pho- nation was suspended. tography has been •...

  • Page 62: Examination Termination

    The following message is displayed. [YES] Touching the [YES] button will termi- nate the examination itself. [NO] Touching the [NO] button will effect return to the examination check screen. < 60 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 63: Image Reference After Examination (Output Again)

    • Ensure that the [Output the printer status queue. Destination] button for check screen or host the queue that has not status check screen. been output is kept selected. < 61 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 64: Image Sharing

    Touch the [Network] Button at the upper right of the examination history screen. • ”Console Select” screen will be displayed. • Name of your CS-3 will be displayed on the [Network] button. In the network field, touch the button for the Console on which the desired image resides.
  • Page 65 Touch the [Back] Button at the bottom right of the examination history screen. • “Console Select” screen will be displayed. • Name of the target CS-3 that is under reference will be shown on the [Network] button. Touch the button in the local column (name of your own CS-3 is displayed).

  • Page 66: Overlay

    Ch.3 Sequence of Examination Overlay CS-3 allows texts to be printed as an overlay on the printed film. Overlay function includes “Marker” or “Stamp” that allows prescribed text strings to be printed at the specified position, “Grid/Scale” that allows the grid or scale layer to be layed over the image and “Annotation” that allows text strings to be allocated at any position.
  • Page 67 Overlay allocation described in the above can also be applied to the scanned images in the “Exam History” screen. However, when there are multiple printers are connected t to the CS-3, print out of the order selecting the overlay position is only capable from one printer. The name of the printer from which the order can be printed with the overlay position selected will be displayed at the upper left of each screen, that is “Marker1 Select”, “Marker2...

  • Page 68: Allocating The Annotations

    Also to be noted is that even the output is made under the same font size and output method, output font size may be slightly different depending on the resolu- tion (Normal/High Res). < 66 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 69 • “Detailed Data Setting” screen (Image Processing) will be displayed. Touch the [Overlay] tab. • Detailed Data Setting Screen (Overlay) will be dis- played. Touch the [Annotation] button. • “Annotation Setup” screen will be displayed. < 67 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 70 [Delete] or [Back Space] key on the keyboard. Once the text string is registered on the preset button, it will be retained even after turning the power OFF. < 68 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 71 Input the text strings using the keyboard. • Pressing the [Enter] on the keyboard allow a line break, and annotation of several lines can be input. < 69 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 72 • When the area other than annotation is clicked, switches the status to the one where the next annotation can be allocated after the first annota- tion is displaced. < 70 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 73 • When the area other than annotation is clicked, switches the status to the one where the next annotation can be allocated after the change is effected. < 71 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 74 The text strings of the rotated annotation cannot be changed. Text can be changed only after restoring the original status where the annotation is not rotated. Font size, font color and background color can be changed even in the rotated status. < 72 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 75 • When the area other than annotation is clicked, switches the status to the one where the next annotation can be allocated after the font size is changed. < 73 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 76 Click the [OK] button or left-click the mouse in the area other than annotation. • Text color and background color of the annotation will be effected. • Next annotation is ready to be allocated. < 74 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 77 • A message confirming deletion of all annotations will be displayed. Click the [YES] button. • All annotations will be deleted. • Clicking the [NO] button returns to the “Annotation Setup” screen without deleting the annotation. < 75 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 78 Ch.3 Sequence of Examination < 76 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 79: 4 Description Of Screens

    Description of Screens This chapter describes each of the CS-3 screens. < 77 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 80: Examination Search Screen

    Used to display the system menu screen. Menu Screen If an error occurs on the CS-3 or any other device con- nected to the CS-3 such as a input/output device, the [REGIUS] button is displayed in red color. Color of the [KONICA MINOLTA] button.

  • Page 81: Examination List Screen

    Screen Screen Patient data items dis- played will differ depending upon set- tings. Schedule/Pending The number of patient data already reserved and of examinations in suspended status are displayed. < 79 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 82 [OK] Button Returns to the examination search screen. • Patient data selected from the examination list screen is displayed on the examination search screen. < 80 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 83: Examination Check Screen [Single-Image Screen]

    • A reduced image is displayed to the left of the button for orders for which exposure has been completed. • [OK] is displayed for orders for which exposure has been completed and that have been output. < 81 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 84 Display of the ( mark at the top right of the screen indicates no- inversion/no-rotation status. Exposure Parameters Display/none-display of the notch mark and X- ray unit depends upon settings < 82 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 85 Selects the upright reader. reader. [Modify Exam. Tag] Button Enables changes to the parameters (reader, parameter keys) of the order selected from the list. • New orders may be added. < 83 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 86 Selection is enabled when there is an order for long Process body parts and the exposure is actually completed. “Stitch” function is an option. On the CS-3 that has not incorporated this option, “Composite Image Select” screen or “Composite Image Adjustment” screen will not be displayed.

  • Page 87: Examination Check Screen [Multiple-Image Screen]

    Display of the ( mark at the top right of the screen indicates no- Image Display Field <Prior to exposure> inversion/no-rotation The exposure parameters and reader status are dis- status. played. < 85 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 88 [NG] Button p.49 Image Erases the image of the selected order after exposure. Erasing • An order for which OK has been selected cannot be p.51 Image erased. Substitution < 86 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 89 Selection is enabled when there is an order for long Process body parts and the exposure is actually completed. “Stitch” function is an option. On the CS-3 that has not incorporated this option, “Composite Image Select” screen or “Composite Image Adjustment” screen will not be displayed.
  • Page 90 • Returns to “Exam Check” screen. [OK] Button Execute the “1 on 2 Output” using the layout displayed in the “Image Position Check Field”. • Returns to “Exam Check” screen. < 88 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 91 • Returns to “Exam Check” screen. [OK] Button Execute the “1 on 2 Output” using the layout displayed in the “Image Position Check Field”. • Returns to “Exam Check” screen. < 89 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 92: Examination List Screen

    Examination List Screen (When the examination list screen has been set as the initial screen) The screen displays a list of patient data reserved for examination by CS-3 or ID-680 Series or Radiology Information System (RIS). The patient data required for examination may be selected from the patient data list.
  • Page 93 [KONICAMINOLTA] Button Menu Used to display the system menu screen. Screen If an error occurs on the CS-3 or any other devices connected to the CS-3 such as input/output devices, the [REGIUS] button is displayed in red color. Color of the [KONICA MINOLTA] button.

  • Page 94: Patient Data Input/Search Screen

    This button is displayed only with basic system or the search-type system. p.32 • The search result screen is displayed. Patient Data Input (Search from Data Base) p.94 Search Result Screen < 92 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 95 The input patient data is added to the reservation list. • Display returns to the examination list screen. • The input patient data is added to the examination list. < 93 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 96: Search Result Screen

    The selected patient data is input into the patient data input/search screen and the search result screen closed. • The selected patient data is displayed in the patient data input/search screen. < 94 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 97: Patient Data Amendment Screen

    • For items requiring character or numerical input, the keyboard will be displayed. (alpha- betical/numerical). • For items where the selected branch is set, a branch selection button is displayed. p.25 Using the Input Panel < 95 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 98: Extraction Parameter Screen

    List Parameter Screen Screen [Hospital Department] Button Used to select "hospital department" parameters. [Location(Ward)] Button Used to select "location(ward)" parameters. [Exam. Room] Button Used to select "exam. room" parameters. < 96 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 99 To return to the list prior to extraction: Touch the [Filter] button again to display the extraction parameter screen and touch the [Clear] and [OK] buttons in sequence. List Screen Extraction Parameter Screen < 97 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 100: Body Part/Parameter Selection Screen

    General Category Button The body part for examination may be selected using the buttons displayed. Body part/parameter buttons will differ depending on the body part selected here. < 98 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 101 (The order will be displayed in a green frame.) Scroll Buttons [ Used to scroll the order list 8 orders at a time when 9 or more orders are registered. < 99 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 102 When exposure parameters are selected in transition from the initial screen, the parameters selected from the exposed part/parameter selection screen may be re-aligned as follows on the examination search screen: upright para- meter->recumbent parameter->cassette parameter. < 100 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 103: Detailed Data Setting Screen (Acquisition)

    Used to select items to be set on the detailed data set- Detailed Data ting screen. Setting Screen Touching the tab will result in display of the setting (Acquisition) (Image Processing) screen for that item. (Print Format) (Overlay) < 101 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 104 • Display returns to the examination check screen. Screen [Single-Image Screen] [Multiple- [OK] Button Image Screen] Sets the selected exposure parameters • Display returns to the examination check screen. < 102 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 105: Detailed Data Setting Screen (Image Processing)

    Used to select items to be set on the detailed data set- (Acquisition) ting screen. (Image Processing) (Print Format) Touching the tab will result in display of the setting (Overlay) screen for that item. < 103 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 106 • Display returns to the examination check screen. [Single-Image Screen] [OK] Button [Multiple- Sets the selected image processing parameters Image Screen] • Display returns to the examination check screen. < 104 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 107: Processing Menu Selection Screen

    Processing Menu Display changes, touch the Names of the menus incorporated into CS-3 are displayed [CANCEL] button. in button format. Touching a menu name will produce display of image pro- cessing parameters (LUT, S, G-values, ROI) registered in that menu.

  • Page 108: Roi Adjustment Screen

    ROI fields. Each time the button is touched, the display switches between the two ROI fields. [Expand(H)] Button Widens the ROI width. [Reduce(H)] Button Narrows the ROI width. < 106 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 109: Rotation/Flipping Selection Screen

    Please note the limitation for the stitched images (composite image). Available : “Original”, “Flip”, “180º Rotate”, “180º Rotate+Flip” Not Available : “90º Rotate”, “90º Rotate+Flip”, “270º Rotate”, “270º Rotate+Flip” < 107 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 110: Parameter Adjustment Screen

    [Enhance Detail] Button Selection of enhancement of the image using E-process- ing (equalization) and F processing (frequency). Each time the button is touched, the setting changes (ON <--> OFF). < 108 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 111 • Display returns to the detailed data setting screen (image processing). [OK] Button Sets the adjusted enhancement processing parame- ters. • Display returns to the detailed data setting screen (image processing). < 109 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 112: Enhancement Type (E-Processing) Selection Screen

    A list of preset F-processing parameter names is displayed in button format. Touch the parameter name button to select the desired parameter. • The enhancement type (F-processing) selection screen is closed. < 110 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 113: Detailed Data Setting Screen (Print Format)

    Used to select items to be set on the detailed data set- (Acquisition) ting screen. (Image Processing) (Print Format) Touching the tab will result in display of the setting (Overlay) screen for that item. < 111 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 114 Two of the same image are output left/right-aligned. Two of the same image are output vertically-aligned. [2 on 1] Button [AB] Two different images are output left/right-aligned. Two different images are output vertically-aligned. < 112 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 115 Any areas on the chest wall side of a mammogram image are blacked out. Area not exposed to X-ray The result of irradiation field masking may be checked using the image display area on the examination check screen. < 113 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 116 • Display returns to the examination check screen. p.81,85 Examination Check [OK] Button Screen Sets the selected print format. [Single-Image Screen] [Multiple-Image • Display returns to the examination check screen. Screen] < 114 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 117: Film Size Selection Screen

    • The film size selection screen will be closed. selection here are print- er output film sizes. Thus only film sizes available on the printer used may be selected. < 115 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 118: Masking Size Adjustment Screen

    Masking Size (yellow) [Rotate (CCW)] Button Rotate (CCW) the masking width. [Rotate (CW)] Button Rotate (CW) the masking width. [Expand(H)] Button Widens the masking width. < 116 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 119 Masking frame with off-screen segment cut To return the masking frame to its initial status, return to the parameter key selection screen and re-select exposure parameters. < 117 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 120: Detailed Data Setting Screen (Overlay)

    Used to select items to be set on the detailed data set- (Acquisition) ting screen. (Image Processing) (Print Format) Touching the tab will result in display of the setting (Overlay) screen for that item. < 118 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 121 • Display returns to the examination check screen. Screen [Single- Image Screen] [OK] Button [Multiple- Sets the selected overlay. Image Screen] • Display returns to the examination check screen. < 119 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 122: Marker 1 Selection Screen

    A list of markers available for output is displayed in button format. Touch the required marker. • If the [OFF] button is selected, marker 2 will not be output. • The marker 2 selection screen is closed. < 120 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 123: Stamp Selection Screen

    A list of stamp format numbers available for output is displayed in button format. Touch the required stamp number. • If the [OFF] button is selected, the stamp will not be output. • The stamp selection screen is closed. < 121 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 124: Scale/Grid Selection Screen

    • A scale overlay is output at • A 50mm square grid overlay around the image at 5mm the right and lower center of is overlaid on the image. intervals. the image at 5mm intervals. < 122 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 125: Annotation Setup Screen

    Register the text strings that should be allocated as an string on the annotation. The text strings registered on each preset preset buttons button will not be aborted even after completion of the examination or by power OFF. < 123 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 126 When the text of the annotation is selected, it changes the color to “Black” when the background is black, to “White” when the background is white, to “Blue” when the background is transparent. < 124 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 127 [CANCEL] Button Cancels the annotation settings. • Returns to the “Detailed Data Setting” screen. [OK] Button Saves the annotation settings. • Returns to the “Detailed Data Setting” screen. < 125 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 128: Additional Information Screen

    A maximum of 52 patient data fields are available and these are divided on screen over multiple pages. Scroll Buttons [ Enables scrolling of additional information pages. The current page number is displayed above the but- ton. < 126 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 129 • Display returns to the detailed data setting screen. (Acquisition) (Image Processing) (Print Format) [OK] Button (Overlay) Selected additional information is set. • Display returns to the detailed data setting screen. < 127 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 130: System Menu Screen

    Ch.4 Description of Screens System Menu Screen Enables checking of the status of devices connected to CS-3, examination history, selection of examining operator, setting of system operational data, etc. Additionally, CS-3 system termination is carried out from this screen. Initial Screen...

  • Page 131: Device Status Screen

    This is an application software that controls the network between REGIUS MODEL 170/190 and CS-3. (There are two types of JM; One is built-in, the other is external.) Contact your system administrator to ensure which of the two types is used.
  • Page 132 : Error has been occurred. • Touching an icon produces display of the status of the host as well as examination data reserved for output. Printer p.135 Printer A list of printers connected to CS-3 is displayed in icon Status Check format. Screen The icon colour indicates the reader device status.

  • Page 133: Reader Status Check Screen

    Display is invoked by touching the upright position reader icon on the device status screen. Reader Status System Status Check Screen Screen (Cassette) Reader Status Check Screen (Cassette) Display is invoked by touching the cassette reader icon on the device status screen. < 131 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 134: Jm Status Check Screen

    System Status JM Status Screen Check Screen Error Message Display p.152 Trouble of In the event of a JM error, an error message is dis- played in red characters. < 132 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 135 REGIUS MODEL 170/190 Read Status Display • Bar Code Registration Cassette reader read status list is displayed. Read status data registered by this CS-3 is displayed in green characters. Read status data registered by other CS-3 units is displayed in grey characters.

  • Page 136: Host Status Check Screen

    Attempts to change the output destination to a host already specified will produce display of the message shown at Right. < 134 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 137: Printer Status Check Screen

    For details of errors and remedies, refer to the printer operation manual. Output Queue Display A list of output reserved examination data for which examination has been completed is displayed. < 135 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 138: Ris Status Check Screen

    RIS-IN1 on the left side. There are two types of ID-680 (for input and RIS Status System Status Check Screen output) that is connect- Screen (Input) ed to the system as RIS. < 136 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 139 Turns output to the RIS-OUT ON/OFF. This button should not [OK] Button be set to "OFF" unless Terminates the RIS-IN status check screen. there is a fault with the ID-680 Series unit. < 137 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 140: Operator Selection Screen

    Screen tor selection screen are set using user tools. Operator Name List A list of operator names registered in CS-3 is displayed in button format. To select a name, touch the corresponding button. • The button corresponding to the name select- ed will be displayed in a green frame.

  • Page 141: Examination History Screen

    Consoles. Name of the Console whose images are currently browsed will appear on the button. • “Console Select” screen will be displayed. < 139 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 142 Appears when the order that has been output is select- Screen • The image reference screen is displayed. [Back] Button p.128 System Menu Terminates the examination history screen and returns Screen to the system menu screen. < 140 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 143: Console Select Screen

    Console and changes the frame color to green. [CANCEL] Button Cancels the selection of the target Console. • Returns to the “Exam History” screen. [OK] Button Displays the “Exam History” screen of the selected Console. < 141 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 144: Image Reference Screen

    103, 111, 118 • To modify detailed data and additional examination data Detailed Data Setting Screen settings, click on any point in the frame. (Acquisition) (Image Processing) (Print Format) (Overlay) < 142 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 145 Status disk incorporated into CS-3. Screen If an error occurs on the CS-3 or any other devices connected to the CS-3 such as input/output devices, the [REGIUS] button is displayed in red color. • The device status screen is displayed.

  • Page 146: Output Setting Screen

    [OK] Button Enables image output to the selected device. • The screen will change from the output setting screen to the image reference screen. [CANCEL] Button Cancels image output. < 144 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 147: Reject Reasons Screen

    Select whether the reexamination is done or not. [CANCEL] Button Close the “Reject Reasons” screen without effecting the reason for image abortion. [OK] Button Close the “Reject Reasons” screen after effecting the reason for image abortion. < 145 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 148 Ch.4 Description of Screens < 146 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 149: 5 Operator Security Mode

    Using the operator security mode to entitle an operator to start up the CS-3 or to change the operator name will help avoid mishandling the Operator system as well as clarify the person responsi- ble for the operation. Security Mode In this chapter, how to operate the operator security mode is detailed.

  • Page 150: User Name & Access Right

    When the operator security mode is in effect, all operation information of any operator (hereinafter referred to as "user") can be stored in the CS-3 as an operation log unique to that user. These users can be classified into three categories as follows.

  • Page 151: Log In

    Log Off While the operator security mode is in effect, implement log off when you are leaving the CS-3 or other user comes and sits on your place to succeed the operation of CS-3. There are two methods to implement log off.
  • Page 152 In the case that the application is logged off in between start and completion of study, and other user implements log in, a message requesting a confirmation that the previous user has logged off before the study is completed. < 150 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 153 Troubleshooting This chapter describes typical methods of trouble shooting and a list of error messages displayed on CS-3. < 151 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 154: Ch.6 Troubleshooting

    JM. The switchover can be effected from a single CS-3 unit. In such cases, it is unnecessary to re-boot the CS-3 unit, although the REGIUS MODEL 170/190 must be re-booted. The procedure for switchover to the backup unit when a fault occurs on the JM unit is described below.
  • Page 155 JM After completion of switchover to the backup JM, the message shown below will be displayed on other CS-3 units connected to the same system. Touch the [YES] button to close the message window. Photography using REGIUS MODEL 170/190 will now be possible.

  • Page 156: Error List

    Ch.6 Troubleshooting Error List Error messages displayed on CS-3 together with methods of resolution are listed below. Concerning the Software / Hardware Error No. Error Message Remedy 1000 Resource Error[X,X]. Restart CS-3, please. Restart the CS-3. 1001 Resource Error[X,X]. Restart CS-3, please.
  • Page 157 1150 Illegal Image Data[X]. Can't output processing. 1151 Illegal Image Data[X]. Can't output processing. 1160 Illegal Image Data[X,X]. Can't output processing. 1140 Illegal Image Data[X,X]. Please check network devices. < 155 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 158 Contact your Service Representative. Concerning the Reading Error No. Error Message Remedy 1214 Illegal Image Data. Contact your Service Representative. 1215 Order was deleted. 1250 Reader Setting Error. Please call service. < 156 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 159 25100 Network Error (Timeout:in General Communication) 25200 Network Error (Timeout:in Image Transmission) 25210 Network Error (Timeout:after Image Scanning) 25300 Network Error (Timeout:Image Re-Transfer State) 26000 Operation Error (Invalid Job) < 157 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 160 Erase-lamp's Current Detective Sensor 1 NG 4082 Erase-lamp's Current Detective Sensor 2 NG 4091 Front Door Opening Sensor NG 4101 Slow Scan Motor NG 4102 Transport Unit Motor NG 4103 Elevator Motor NG < 158 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 161 Cassette Exists(Elevator) 4901 Cassette Exists(Alignment) 4902 Cassette Exists(Open Door of Discharge) 4903 Cassette Exists(Backboard Adhesion) 4904 Turn Off Erase-lamps(2) 4905 SCB Communication Error 4906 Warped Cassette 4907 Cassette Opening Error < 159 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 162 Error Message Remedy 4908 Falling Cassette Restart the CS-3 and REGIUS MODEL 4909 170/190. The same error occurs repeatedly. 4910 The same error occurs repeatedly. 4914 Contact your Service Representative. < 160 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 163 0502 Servo motor alarms(excess current) 0503 Servo motor alarms(overflow) 0511 Upper sensor returning from detection error in 2 sec. after the start of operation 0512 Servo motor alarms(overheated driver) < 161 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 164 No-shut-off B error of intermittent erase lamp 0804 No-shut-off AB error of intermittent erase lamp 0811 Upper&lower sensor simultaneous detection error 0812 Lower sensor detection error 0813 Servomotor alarms(overheated driver) 0814 Servo motor alarms(excess current) < 162 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 165 Servomotor alarms(overheated driver) 0C02 Servo motor alarms(excess current) 0C03 Servo motor alarms(overflow) 0C11 Upper sensor returning from detection error in 2 sec. after the start of operation 0C12 Servomotor alarms(overheated driver) < 163 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 166 0F42 No-shut-off B error of erase lamp 0F43 No-shut-off AB error of erase lamp 0F51 Polygon PLL lock error 0F61 HSync is active 0F62 The polygon index is active < 164 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 167 SCSI & MPU parity error F029 Offset error F02A Short transfer period error F02B Offset error & Short transfer period error F02C REQ/ACK timeout F031 Disconnected in transfer progress < 165 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 168 No-illuminated erase lamp B 0001 Memory error for correcting CPU 0002 Memory error for controlling CPU 0003 Transfer error for correcting CPU program 0004 Transfer error for controlling CPU program < 166 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 169 2040 EMPTY 14X17 PAPR 2041 EMPTY 24X24 2042 EMPTY 24X24 CLR 2043 EMPTY 24X24 BLUE 2044 EMPTY 24X24 DR 2045 EMPTY 24X24 DR CLR 2046 EMPTY 24X24 DR BLUE < 167 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 170 2087 LOW 14X17 DR 2088 LOW 14X17 DR CLR 2089 LOW 14X17 DR BLUE 2090 LOW 14X17 PAPR 2091 LOW 24X24 2092 LOW 24X24 CLR 2093 LOW 24X24 BLUE < 168 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 171 2124 EMPTY 10X12 2125 EMPTY 10X12 CLR 2126 EMPTY 10X12 BLUE 2127 EMPTY 10X12 DR 2128 EMPTY 10X12 DR C 2129 EMPTY 10X12 DR B 2130 EMPTY 10X12 PAPR < 169 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 172 Ch.6 Troubleshooting < 170 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 173: 7 Optional Functions

    Optional Functions This chapter describes the operation of optional functions available for the CS-3. < 171 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 174: Overview Of The Optional Functions

    Following functions are available as options for CS-3. These optional functions are enabled by purchasing each option separately from the CS-3 main unit. For the types of options incorporated in your CS-3, please contact the institute’s administrator or your technical repre- sentative.

  • Page 175: Image Stitching Process

    Image Stitching Process Procedures to stitch the images and to create a composite image are described below. “Image Composite” function is an option exclusive to the CS-3. On the CS-3 that has not incorporated this function, “Composite Image Select” screen and “Composite Image Adjustment”...
  • Page 176 10 orders, scroll the list using the scroll button. Scroll [ ] Button Scrolls the list by one order. Scroll [ ] Button Scrolls the list by 9 orders. < 174 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 177 Stitching process is not completed only by registering the multiple orders for the display of composite image. It will be stitched and become effective when the [Build] button is touched and the “Composite Image Adjust” screen is displayed. < 175 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 178 Select in the “Whole Stitched Images” the area that shall be enlarged and displayed. The area enlarged is indicated with the blue frame. The size of the blue frame changes by the setting of zoom slider. < 176 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 179 [Order] button. [Order] Button Setting 3 plates 2 plates Upper Normal Image Lower Upper Image Lower Image Image Image Upper Lower Lower Reverse Image Image Image Upper Image Image < 177 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 180 Sets whether to output the image or not with this button. [OK] Button Output the image according to the setting made by “ ” Output ON/OFF button. [CANCEL] Button Cancels the image output. < 178 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 181 On the CS-3 that is set to “Tiling at Border”, a message “Unable to tile due to insufficient film size. Switches to Tiling by Film Size” will be displayed when the longer side of the film (“h2”...
  • Page 182 Stitching process is not completed only by registering the multiple orders for the display of composite image. It will be stitched and become effective when the [Build] button is touched and the “Composite Image Adjust” screen is displayed. < 180 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 183 Set the detailed data again to the orders after they are stitched. Please note the limitation for the stitched images (composite image). • Only “Original”, “Flip”, “180º Rotate” or “180º Rotate+Flip” is selectable. < 181 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 184 Ch.7 Optional Functions < 182 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 185: 8 Operating The Optional Equipments

    Operating the Optional Equipments This chapter describes usage of optional equip- ments for the CS-3. < 183 > < 183 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2 REGIUS Console CS-3 OPERATION MANUAL Ver. 1.00 2005.1...

  • Page 186: Single Bar Code Reader

    (Check the barcode reading angle or position) Types and Meanings of LCD Meaning Extinguished Ready for reading. Power OFF. Illuminated (Green) Reading completed successfully. Illuminated (Red) Data communication error. Scanner malfunction. < 184 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 187 (beam oscillation becomes smaller) Bring the barcode closer to the area where the beam hits to start barcode reading again. It restores the normal operation. < 185 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 188 012345 012345 ly. If failed, slightly incline the bar code reader, and try to read again. < 186 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 189: Multiple Bar Code Reader

    - Bar code read operation failure. (Check the reading position.) Types and Meanings of LCD Meaning Extinguished Power OFF. Illuminated (Green) Reading for reading.(Laser output) Illuminated (Red) Reading completed successfully. < 187 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 190 Bar Code The multi-bar code reader is capable of reading bar codes from all directions. Note that the head may be tilted 30 degrees. < 188 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 191: 9 Care & Maintenance

    Care & Maintenance This chapter details the procedure for care and maintenance of the CS-3. < 189 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.00 2005.1...

  • Page 192: Care & Maintenance

    Periodically check the built-in clock, consulting with an User Tool administrator. 3) Cleaning the CS-3 Operation Unit (monitor). Periodically clean the CS-3 Operation Unit (monitor), by following the cautions below. • Wipe the monitor with a soft cloth. • Do not use a cloth dampened with chemical or water.

  • Page 193: Care & Maintenance Schedule

    Once every five years or every 20,000 operating hours Backup the system Every six months Above maintenance is the service included in Maintenance Contract. Please contact your technical representative for the actual services. < 191 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 194 Ch.9 Care & Maintenance < 192 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 195: Specifications

    Specifications < 193 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 196 (several), Keyboard, Mouse, Operation manual, Hardware user’s manual Options Upright Reader control interface (number of readers controlled: Upright Reader x 1 unit), Ethernet port (1000base-T), Barcode reader (single and multi) for cassette registration < 194 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 197 72 mm (with connectors) Cable Length Desk Stand Dimensions BS9019 - K01 250 (H) x 151 (W) x 170 (D) mm (without projected part) Weight 193 g Cable Length < 195 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...
  • Page 198 – 40 ~ 60: Humidity 5 ~ 95%RH These specifications are subject to change Dimensions 80(W) x 105(D) x 150(H) mm without notice due to continual improve- Weight 380g (without cable.) ments. < 196 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2...

  • Page 199: Index

    Mammo (chest wall)..........113 Masking ..............113 Multi Bar Code Reader ...........187 Multiple-Image Format ..........30 My Favorite ...............34 Notch Mark ...............82 Order Display ............82 Out of Shutter ............113 < 197 > < 197 > REGIUS Console CS-3 OPERATION MANUAL Ver. 1.00 2005.1...
  • Page 200 0862-55010 C #!6-...

This manual is also suitable for:

0862

Table of Contents