Table of Contents
Advertisement
What to do in an emergency
What to do in an emergency
Road warning
When an emergency situation occurs
while driving or when you park by the
edge of the roadway, you must alert
approaching or passing vehicles to be
careful as they pass. For this, you should
use the hazard warning flasher.
Hazard warning flasher
The hazard warning flasher serves as a
warning to other drivers to exercise
extreme caution when approaching,
overtaking, or passing your vehicle.
OSK3068001NR
It should be used whenever emergency
repairs are being made or when the
vehicle is stopped near the edge of a
roadway.
Depress the flasher switch with the
START/STOP button in any position. The
flasher switch is located in the center
fascia panel. All turn signal lights will
flash simultaneously.
僅 The hazard warning flasher operates
whether your vehicle is running or not.
僅 The turn signals do not work when the
hazard flasher is on.
僅 Care must be taken when using the
hazard warning flasher while the vehi-
cle is being towed.
7
2
In case of an emergency while
driving
If an emergency situation occurs while
driving, stay calm and take the following
steps.
If the Vehicle Stalls While Driving
1. Reduce your speed gradually, keep-
ing a straight line.
2. Move cautiously off the road to a safe
place.
3. Turn on your hazard warning flasher.
4. Try to start the vehicle again. If your
vehicle will not start, contact an
authorized Kia dealer or seek other
qualified assistance.
If the Vehicle Stalls at a crossroad
or crossing
1. If safe to do so, shift to the N (Neutral)
position.
2. Push the vehicle to a safe location.
If you have a flat tire while driv-
ing
1. Take your foot off the accelerator
pedal and let the vehicle slow down
while driving straight ahead.
WARNING
Do not apply the brakes immediately to
slow down the vehicle
2. Use the paddle shifter (left side lever)
to increase regenerative braking con-
trol.
Road warning
Advertisement
Chapters
Table of Contents
