Software Upgrade - Avidyne 700-00182 Series Instructions For Continued Airworthiness

Avidyne 700-00182-XXX and 700-00179-XXX

5.3 Software Upgrade

The following procedures should be followed when performing optional
or mandatory software change to the IFD System:
1. Acquire the software image and associated loading procedure from the
manufacturer.
2. Verify the software part number configuration before and after
maintenance is performed on the airborne equipment using the loading
procedure instructions.
3. It is the responsibility of maintenance personnel to ensure the identified
part is recorded in the necessary maintenance logs.
4. It is the maintenance personnel's responsibility to ensure that the software
part identification has been logged. When new software is loaded into the
unit, the correct software part number should be verified according to the
instructions accompanying the software change before the unit is returned
to service. Hardware versions are identified on the data label by brackets
following the main part number.
5. Changes to software part number, version, and/or operational
characteristics should be reflected in the Operator's Manual, Aircraft
Flight Manual, Aircraft Flight Manual Supplement, and/or any other
appropriate document.
Confidential property of Avidyne Corporation
Not to be disclosed without permission
Instructions for Continued Airworthiness
Page 14 of 14
AVIFD-315
Revision: 08, Date: 01/18/17