Headers - JETWAY 865GVBMS User Manual

•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(13) Serial-ATA Port connector: SATA1/SATA2
This connector support the provided Serial ATA IDE hard disk cable to connecting the
motherboard and serial ATA hard disk.

2-6-2 Headers

(1) Line-Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-out, MIC connector with cable.
(2) USB Port Connector/Headers (9-pin) : USB2, USB3
The USB2, USB3 is for internal connecting USB device directly. The USB2 header is
used for connecting the additional USB port plug. By attaching an option USB cable,
your can be provided with two additional USB plugs affixed to the back panel.
Pin 1
SATA2
SATA1
Serial-ATA Port Connector
AUDIO
2 10
Pin 1
9
Line-Out, MIC Headers
23
On Chip Serial ATA