Advertisement
Make sure all the devices you want to connect have been turned off.
Always comply with the operating instructions of the devices that you want to connect.
Do not remove more than 6 mm of insulation from the ends of the speaker cable.
Introduce the cables to the terminals neatly to exclude short circuits.
Speaker pair 1 remains active when selectors and are both in the OFF position. This protects your amplifier against damage during idle operation.
Product | 2-Way speaker switch box |
Article number | ASWI2652BK |
Dimensions (l x w x h) | 220 x 90 x 45 mm |
Operating temperature | -25°C – 85°C |
Storage temperature | -25°C – 85°C |
Humidity | 20 – 75% (RH) |
Maximum load | 60 W RMS per channel |
Speaker impedance | 4 – 16 Ohms |
Cable type | Loudspeaker cable |
Maximum cable cross-section | 2.5 mm2 |
Maximum cable length | 50 m |
Nedis BV
De Tweeling 28, 5215 MC
's-Hertogenbosch The Netherlands
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the ASWI2652BK that isn't answered in the manual? Leave your question here.