Table of Contents
Advertisement
View DMI Event Log
Press [Enter] to view the contents of the DMI event log.
Event Logging
This setting disables/enables the BIOS to log DMI (Desktop Management Interface)
events. Setting options: [Disabled], [Enabled].
Mark DMI Events as Read
Press [Enter] and a screen pops up, asking users to confirm whether or not to
clear all DMI event logs immediately. Press [Y] and [Enter], the BIOS will clear all
DMI event logs right away.
Clear All DMI Event Logs
When this setting is set to [Yes], the DMI event log will be cleared at next POST
stage. Then, the BIOS will automatically set this option to [No]. Setting options:
[Yes], [No].
ASF Configuration (Optional)
This submenu specifies the ASF configuration.
BIOS Boot Timeout
This setting specifies the time period for BIOS to boot before the system is
reset.
OS Boot Timeout
This setting specifies the time period for OS to boot before the system is reset.
Power-On Wait Time
This setting specifies the maximum amount of time for Alert Sending Device
(ASD) to establish connection with its transport media.
Minimum WatchDog Timeout
This setting specifies the minimum time period for BIOS to stop the WatchDog
Timer after a reset has occurred.
ASF Configuration
BIOS Boot Timeout:
OS Boot Timeout:
Power-on Wait Time:
Minimum WatchDog Timeout:
BIOS Setup
[0]
[0]
[60]
[60]
4-15
Advertisement
Table of Contents
