MSI MS-9801 User Manual page 48

Onboard Parallel Port
Select an address and corresponding interrupt for the parallet port.
Parallel Port Mode
To operate the onboard parallel port as Standard Parallel Port only, choose [SPP]. To
operate the onboard parallel port in the EPP mode simultaneously, choose [EPP]. By
choosing [ECP], the onboard parallel port will operate in ECP mode only. Choosing
[ECP + EPP] will allow the onboard parallel port to support both the ECP and EPP
modes simultaneously.
EPP Mode Select
Select the EPP mode.
ECP Mode Use DMA
Select the DMA channel for ECP mode.
BIOS Setup
3-13