Table of Contents
Advertisement
Operating Your Radio
ATIS ID Programming
The Automatic Transmission Identification System (ATIS) feature of this Cobra radio
is used to identify marine vessels in some inland waterways of European countries
that require ATIS transmission. An ATIS ID number is required to operate the ATIS
feature. The ATIS ID number is derived from your vessels call sign. You must enter
your ATIS ID number into this radio before the ATIS system will become functional.
Please consult your local dealer for questions about local ATIS requirements.
With this feature activated the vessels ATIS ID number is transmitted after every
push of the Talk button.
Channel Down
and SCAN Buttons
ATIS ID Start Screen
40 English
ATIS ID Programming
To Set the ATIS ID Number:
NOTE
The ATIS ID is a 10 digit number that will always begin
with the number "9." You will be asked to enter only
the last nine digits. The first digit, "9", has been
automatically entered for you.
1. With the radio turned Off; press and hold the
Channel Down and SCAN buttons and
simultaneously power On the radio.
2. The LCD will display and flash the ATIS icon. A dash
(-), to the right of the digit 9, will be flashing for the
next entry.
NOTICE
Remember, you only have one (1) attempt to set the
ATIS ID number. Once this number has been entered,
only your Cobra distributor with PC software can
reset the ATIS ID number. You can also return the
radio to Cobra for reprogramming.
•
Advertisement
Table of Contents
