Table of Contents
Advertisement
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
4. Carefully remove the battery with the
screwdriver.
5. Install a new battery (3V CR 2032) with
the + facing downwards.
6. Assemble the two halves of the remote
control.
7.
Install the key blade.
Remote Control Without a Folding
Key Blade
1
E87964
1.
Press and hold the buttons on the
edges to release the cover. Carefully
remove the cover.
2. Remove the key blade.
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Keys and Remote Controls
2
1
E105362
3. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
E119190
4. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
31
3
4
Advertisement
Table of Contents
