Table of Contents
Advertisement
I
On, Off and Volume: Press the button to switch the audio system on or off.
Turn the dial to adjust the volume.
J
Seek and Fast Reverse: In radio mode, select a frequency band and press this
button. The system stops at the first station down the band. Press and hold
the button to move quickly, then release to stop at the previous available station.
In CD mode, press to select the previous track. Press and hold the button to
move quickly backward through the current track.
K
MENU: Press the button to access different audio system features. See Menu
Structure later in this section.
L
SOUND: Press the button to adjust the sound settings for bass, treble, middle,
balance and fade. Press OK to set or press MENU to exit.
M
AUX: Press the button to access the AUX and SYNC features, it will also cancel
the menu or list browsing.
N
RADIO: Press the button to select different radio bands, it will also cancel the
menu or list browsing.
O
CD: Press the button to change source to CD, it will also cancel the menu or
list browsing.
Sound Button
This will allow you to adjust the sound
settings (for example bass, middle and
treble).
1.
Press the SOUND button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.
Waveband Button
Press the RADIO button to select from the
wavebands available.
You can use the selector to return to radio
reception when you have been listening to
another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Audio System
Station Tuning Control
Seek Tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual Tuning
1.
Press the MENU button.
2. Select RADIO mode and then
MANUAL TUNE.
3. Use the left and right arrow buttons to
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
4. Press OK to continue listening to a
station.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
170
Advertisement
Table of Contents
