Chapter 3
EPP Mode Select
The onboard parallel port is EPP Spec. compliant, so after the user chooses the
onboard parallel port with the EPP function, the following message will be dis-
played on the screen: "EPP Mode Select." At this time either EPP 1.7 spec or EPP
1.9 spec can be chosen.
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel port
with the ECP feature. After selecting it, the following message will appear:
"ECP Mode Use DMA." At this time, the user can choose between DMA chan-
nel 3 or 1.
Init Display First
This item specifies which VGA card is your primary graphics adapter. Settings:
PCI Slot and AGP.
System Share Memory Size
For SiS650 chipset, the system shares memory to the onboard VGA card. This
setting controls the exact memory size shared to the VGA card. Setting options:
4MB, 8MB, 16MB, 32MB, 64MB, 24MB.
SiS301 Display Type
This item allows you to set the TV display type. Setting options: H/W Default,
CRT1 only, CRT1+LCD Scaling, CRT1+A-V PAL OTV, CRT1+A-V PAL UTV,
CRT1+A-V NTSC OTV, CRT1+A-V NTSC UTV, CRT1+S-V PAL OTV, CRT1+S-V
PAL UTV, CRT1+S-V NTSC OTV, CRT1+S-V NTSC UTV, CRT1+SCART, CRT1+
Hi-TV, CRT1+CRT2.
LCD&TV Select
This item allows you to select LCD or TV for display type. Setting options: off,
LCD, TV, LCD+TV.
3-18