MSI K8NNeo2-FX Series User Manual page 30

M S-7025 ATX M ainboard
Seri al ATA/ Seri al ATA RAID Con n ecto rs co ntro ll ed b y
nForce3-250Gb: SATA1 / SATA2 / SATA3 / SATA4
The Southbridge of this mainboard is nForce3-250Gb which supports four
serial ATA connectors SATA1~SATA4.
SATA1~SATA4 are dual high-speed Serial ATA interface ports. Each supports
st
1 generation serial ATA data rates of 150 MB/s. Both connectors are fully compliant
with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard
disk device. Please refer to the nVidia RAID Introduction for detail software instal-
lation procedure.
SATA3
SATA4
SATA2
1
7
Serial ATA cable
Connect to serial ATA ports
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, which will
cause the loss of data during the transmission.
CD-In Connector: JCD1
The connector is for CD-ROM audio connector.
E-2-18
7 1
PIN
SATA1 1
3
5
7
SATA1~ SATA4 Pin Definition
SIGNAL PIN
GND 2
TXN 4
RXN 6
GND
Take out the dust cover and
connect to the hard disk
devices
JCD1
SIGNAL
TXP
GND
RXP
L
GND
R