Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
A
Standby/on switch [`], [1]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
Decrease the brightness of the display panel
B
To cancel, press the button again.
[AKX520]
The illumination effect is also switched off.
Select the audio source
C
Press [SELECT <, >] (main unit: [SELECT])
repeatedly to select the source:
USB A
USB B
BLUETOOTH
On the main unit:
To start Bluetooth
Basic playback control
D
View the setup menu
E
8
8
CD
FM
AUX
AM
pairing, press and hold [
®
F
View the content information
Select or confirm the option
G
H
Set the sleep timer
Adjust the volume level
I
On the main unit:
Press [VOL] and then turn
[VOLUME/MULTI CONTROL] to adjust the volume.
[AKX520]
Adjust the microphone volume level
Press and hold [–MIC VOL] until "MIC VOL" is shown.
Turn [VOLUME/MULTI CONTROL] to adjust the
volume.
Mute the sound
J
To cancel, press the button again.
"MUTE" is also cancelled when you adjust the volume
].
or when you switch off the system.
View the play menu
K
Select the sound effects
L