Radio - Panasonic SC-AKX520 Operating Instructions Manual

Radio

Preparation
Press [SELECT <, >] repeatedly to select "FM" or "AM".
Manual tuning
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
Or press [8] on the main unit to select "MANUAL".
Continue with step 3.
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
"STEREO" is shown when a stereo broadcast is being
received.
Memory presetting
You can preset up to 30 FM stations and 15 AM stations.
█ Automatic presetting
1
Press [PLAY MENU] to select "A.PRESET".
2
Press [R, T] to select "LOWEST" or "CURRENT"
and then press [OK].
LOWEST Tuning begins from the lowest
frequency.
CURRENT Tuning begins from the current
frequency.
The tuner presets all the stations it can receive into the
channels in ascending order.
To cancel, press [8].
█ Manual presetting
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
Or press [8] on the main unit to select "MANUAL".
Continue with step 3.
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
4
Press [OK].
5
Press [R, T] to select a preset number and then
press [OK].
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies the
same preset number.
█ Selecting a preset station
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
Or press [8] on the main unit to select "PRESET".
Continue with step 3.
2
Press [R, T] to select "PRESET" and then press
[OK].
3
Press [2/3] or [5/6] to select the preset
station.
Improving the sound quality
When "FM" is selected
1
Press [PLAY MENU] repeatedly to select
"FM MODE".
2
Press [R, T] to select "MONO" and then press
[OK].
To cancel, select "STEREO".
"MONO" is also cancelled when you change the
frequency.
To memorise the setting
Continue with step 4 of "Manual presetting".
When "AM" is selected
1
Press [PLAY MENU] repeatedly to select
"B.PROOF".
2
Press [R, T] to select the setting that provides the
best reception and then press [OK].
Checking the signal status
When "FM" is selected
Press [DISPLAY] to select "FM STATUS".
FM – – – – The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO "MONO" is selected as the "FM MODE".
The FM signal is in monaural.
Radio Data System broadcasting
This system can show the text data transmitted by the
Radio Data System available in some areas.
When "FM" is selected
Press [DISPLAY] repeatedly.
FREQ Frequency
PS Programme service
PTY Programme type
Note:
Radio Data System may not be available if reception is poor.
13
13