Tip: At step 5, you can
assign any port to this
printer, such as LPT1
(Windows default
setting), and then
configure the LPD port
later (see the following
section).
4.1.3
5. In the following windows, select the printer port and
enter the printer name.
6. When completed, click OK.
Now, you have added the printer successfully.
NOTE: For some printers of specified manufacturer, you may need to
connect the printer to the computer to install the driver. In this case,
connect the printer to the computer and install the driver first, and then
remove the printer to connect it to the gateway.
Configuring the LPD Port
Before configuring the LPD port, connect your computer to
the gateway first.
1. Open the Control Panel window, then the Printers
window. In the Printers window, right-click the
printer icon you added in the previous section, and
select Properties.
Select this
39