IKEA TORNVIKEN Instruction Manual page 15

Instructions:
 Slide the Back Panel (G) into the notches provided
Caution:
 Make sure the plain side of the Back Panel (G) will
ultimately face the wall
G
Back Panel
F
Support Board
Instructions:
 Insert the Cam Locks into the large holes on the Support
Board (F), the Back Panel (G) and the Right Side Panel (B)
(5 in total as shown above)
 Please, notice the Cam Locks have a "C"-shaped back
 Insert the Cam Locks so the opening of the "C" fits over the
head of the Cam Bolt
 Use a flat screwdriver to turn the Cam Locks clockwise on
half a turn so it locks onto the head of the Cam Bolts
Caution:
 Turn only until it is snug - over-tightening could cause the
Cam to bend or break.
Step 10
Right Side Panel
You will need :
5x
15