Troubleshooting - Stihl BGA 57 Instruction Manual

Hide thumbs Also See for BGA 57:
Table of Contents

Advertisement

17 Troubleshooting

17 Troubleshooting
17.1
Troubleshooting the Blower or Battery
Fault
LEDs on the
battery
The blower does
1 LED flashing
not start when
green.
switched on.
1 LED emits
red light.
3 LEDs flash
red.
3 LEDs light up
red.
4 LEDs
flash red.
The blower
3 LEDs light up
switches off
red.
while in opera‐
tion.
The blower oper‐
ating time is too
short.
Charging does
1 LED emits
not start when
red light.
the battery is
inserted into the
charger.
17.2
Troubleshooting the Charger
Fault
LED on
Charger
Battery not being
The LED
charged.
flashes red.
0458-807-0121-B
Cause
State of charge of the
battery is too low.
The battery is too
warm or too cold.
There is a fault in the
blower.
The blower is too
warm.
There is a fault in the
battery.
There is a break in the
electrical connection
between the blower
and the battery.
The blower or the bat‐
tery is damp.
The blower is too
warm.
There is an electrical
fault.
The battery is not fully
charged.
The battery service
life has been excee‐
ded.
The battery is too
warm or too cold.
Cause
No electrical contact
between charger and
battery.
Remedy
► Charge the battery.
► Remove the battery.
► Allow the battery to cool down or warm
up.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Switch on blower.
► If 3 LEDs continue to flash red: Do not
use the blower and contact your STIHL
dealer for assistance.
► Remove the battery.
► Allow the blower to cool down.
► Remove battery and reinsert it.
► Switch on blower.
► If 4 LEDs continue to flash red: Do not
use the battery; contact a STIHL author‐
ized dealer.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Allow blower or battery to dry,
► Remove the battery.
► Allow the blower to cool down.
► Remove battery and reinsert it.
► Switch on blower.
► Fully charge the battery.
► Replace battery.
► Leave battery inserted in charger.
Charging starts automatically as soon as
the permitted temperature range is
reached.
Remedy
► Remove the battery.
► Clean contacts on charger.
► Insert battery.
English
18.6.
15

Advertisement

Table of Contents
loading

Table of Contents