Lowrance X100C Installation And Operation Instructions Manual page 56

At left, Sonar Page Menu with Upper and Lower Limits command se-
lected. At right, Sonar Chart Limits menu, with Upper Limit selected.
To change the upper and lower limits:
1. From the Sonar Page, press
The Sonar Chart Limits menu appears, with Upper Limit selected.
2. To set the upper limit, press
number, then press → to move the cursor to the next number and re-
peat until the depth is correct, then press
3. To set the lower limit, press ↓ to
change the first number, then press → to move the cursor to the next
number and
| |
EXIT EXIT EXIT
Area "zoomed"
Normal display, in auto depth range mode, left. At right, display
"zoomed" with Upper and Lower Limits focusing on the portion of the
water column from 20 feet to 40 feet deep. In the "zoomed" image, note
repeat until
.
the target definition around the structure.
|↓ to
MENU U
PPER
. Press ↑ or ↓ to change the first
ENT
EXIT
L L
OWER
the depth
Fish arches
52
A L
ND OWER
.
. Press ↑ or ↓ to
|
ENT
IMIT
is correct,
| .
L ENT
IMITS
then press