Table of Contents
Advertisement
OPERATION
5.
A: Correct Chain Tension
B: Incorrect Chain Tension
6.
Tighten sprocket guard nut (B)
with the bar nose held up.
7.
Pull the chain around the bar by hand. Loosen the adjustment if you
feel tight spots.
Tighten guide bar nut to 15-20 N•m (153 to 204 kgf•cm,
133-177 in•lbf). DO NOT over-tighten nut. Damage to saw can result.
8.
Connect spark plug, assemble components in reverse order.
9.
Keep chain properly tensioned at all times.
Note: All chains require frequent adjustments.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
26
CS-2511PN
A
© 11/22 ECHO Incorporated
B
X7503334500
Advertisement
Table of Contents
