Overlay Data - Lowrance X52 Installation And Operation Instructions Manual

targets. This feature is available only when the Fish I.D. feature is on.
The default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press
2. Press ↓ to
F
To turn off FishTrack, repeat these instructions. Turning off FishTrack
in this manner will not turn off Fish I.D. symbols.
Sonar Features menu with Fish I.D. Depths selected. When the check
box to the left is checked, the feature is on. At right, Sonar Page
showing Fish I.D. symbols and FishTrack depths turned on.
HyperScroll
See the entry on Ping Speed, which controls the HyperScroll feature.
Noise Rejection
See the entry on Advanced Signal Processing in this section.

Overlay Data

To change the digital data shown on top of the sonar page:
1. Press
MENU
2. Press ↓ or ↑ to select Data Type|
|
ID D ENT
ISH EPTHS
|↓ to
O
VERLAY
|↓ to
MENU
| |
EXIT EXIT
Symbols with
FishTrack depths
| .
D ENT
ATA
ENT.
54
S F
ONAR EATURES
.
| .
ENT