Alarms; Depth Alarms - Lowrance X52 Installation And Operation Instructions Manual

Alarms

This unit has two different types of sonar alarms. The first is a Fish Alarm.
It sounds when the Fish I.D. feature determines that an echo is a fish.
The other alarm is the Depth Alarm, which has both a Shallow and a
Deep setting. Only the bottom signal will trigger this alarm. This is
useful as an anchor watch, a shallow water alert or for navigation.

Depth Alarms

The depth alarms sound a tone when the bottom signal goes shallower
than the shallow alarm's setting or deeper than the deep alarm's
setting. For example, if you set the shallow alarm to 10 feet, the alarm
will sound a tone if the bottom signal is less than 10 feet. It will
continue to sound until the bottom goes deeper than 10 feet.
The deep alarm works just the opposite. It sounds a warning tone if the
bottom depth goes deeper than the alarm's setting. Both depth alarms
work only off the digital bottom depth signals. No other targets will trip
these alarms. These alarms can be used at the same time or individually.
To adjust and turn on the shallow alarm:
1. Press
MENU
2. Press ↓ to
S
3. Press ↑ or ↓ until the depth is correct, then press
4. Press ↑ to
S
5. To turn off the alarm, press
| |
ENT ENT EXIT
The Sonar Alarms menu.
| |↓ to
MENU S
A D
HALLOW LARM
A E
HALLOW LARM
.
|
A ENT
ONAR LARMS
| .
ENT
EPTH
| |
ENT EXIT
NABLED
MENU
44
.
.
ENT
.
| |↓ to
MENU
|
S A
ONAR LARMS