Depth Range - Automatic - Lowrance LMS-480 Operation Instructions Manual

At left, Sonar Page menu with Depth Cursor command selected. At
right, sonar chart with the depth cursor active. The line indicates the
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press
2. The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press
large fish is 34.64 feet deep.
MENU
EXIT
MENU
63
Cursor line
|↓ to
D C
EPTH URSOR
.
|↓ to
D R
EPTH ANGE
Depth box
| .
ENT
| .
ENT