Table of Contents
Advertisement
Intelligent dosing system
en
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for programmes in which intelligent
dosing can be used.
Overview of programmes ~ Page 16
The dosage strength has been preset to
low (lightly soiled laundry) for
detergent w and to medium (medium
level of softness) for fabric softener i.
It can be changed for each programme.
~ Page 23
In addition to intelligent dosing, cleaning
aids (e.g. stain remover) can be added
manually to compartment v u, if
necessary. ~ Page 33
Depending on the programme,
Note:
the selection (on/off) as well as the
relevant dosage strength that has been
selected for i-DOS iIw and i-DOS w are
saved until they are changed, even
when the machine is switched off.
Topping up the detergent/ fabric
softener:
If, while intelligent dosing is selected,
the respective illuminated display
flashes and there is corresponding
information on the display panel, this
indicates that the minimum fill level has
not been reached. The content is
sufficient for approx. 3 washes.
The same detergent or fabric softener
can be added at any time. If you change
product/manufacturer, we recommend
that you clean the dispensers first.
~ Page 37
If required, adjust the basic dosage.
32
Base dosage
The basic dosages are:
For detergents – based on the
■
manufacturer's recommendation for
average soiling and the respective
water hardness.
For fabric softeners – based on the
■
manufacturer's recommendation for
a medium level of softness.
Refer to the packaging label of your
detergent/fabric softener or ask the
manufacturer directly for this
information.
To find out the hardness of your water
supply, use a test strip or check with
your water supplier.
My water hardness:
Below is an example of detergent
dosages on a packaging label:
Degree of
soiling →
Water
hardness ↓
soft/medium
55 ml 75 ml 120 ml 160 ml
hard/very hard 75 ml 95 ml 150 ml 180 ml
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
To achieve optimum washing and
rinsing results, please set your basic
dosage depending on your detergent,
the water hardness in your area and the
fabric softener you use.
Advertisement
Table of Contents
