Transportation & Storage; Service; Maintenance; Optional Equipment And Repair Parts - Greenlee ES20LXR Instruction Manual

Error
Meaning
Code
1 Over current fuse
2 Over current comparator
3 Overheated circuit board
4 Overheated battery
5 Battery empty: operation stops
6 Faulty cut; complete cycle
7 Faulty cut; incomplete cycle
8 Low battery
9 Battery empty
10 Real-time clock battery low
11 Tool deactivated
12 Service necessary
13 Real-time clock not found
Wireless Bluetooth
14
found
15
16 Pressure sensor not found
17 Pressure exceeded
18 Battery temperature too low
21 Remote control battery low
Transportation & Storage
Remove tool from hot stick and the battery from the tool
before transporting or storing. Store tool in a cool, dry
place in the provided case with the remote.

Service

• Tool service must be performed only by qualified
repair personnel. Service or maintenance
performed by unqualified personnel could result in
a risk of injury.
• When servicing a tool, use only identical
replacement parts. Use of unauthorized parts or
failure to follow service instructions may create a
risk of electric shock or injury.
At either 3 years or 10,000 cycles, schedule a factory
service maintenance. Factory service includes general
inspections, replacement of tool's di-electric hydraulic oil
and testing of tool by trained technicians.
When the Factory Service Date is approaching or arrived,
contact Greenlee Customer Service. Expedited shipping
is available.
52093315 REV 0
Action
Seek Service
Seek Service
Cool Tool
Cool Battery
Charge Battery
Seek Service
Seek Service
Charge Battery
Charge Battery
Seek Service
Seek Service
Seek Service
Re-insert Battery
Seek Service
Re-insert Battery
unit not
®
Seek Service
[Not Used]
Seek Service
Seek Service
Warm Battery
Replace Battery
© 2022 Greenlee Tools, Inc.

Maintenance

• Remove battery before touching the cutting
head or attaching/removing the hot stick
adapter. Your fingers or hands can be crushed,
fractured, or amputated if they become caught in
the tool head or between the tool head and other
objects.
• Maintain this tool according to these
procedures. Do not perform any maintenance
other than as described in this manual. Personal
injury or damage to the tool may result.
• Do not modify tool. Modifying the tool in any
manner may result in personal injury and damage
to the tool. A tool with a cutting head that has been
welded, ground, drilled or modified in any manner
can break during use and throw parts that could
result in severe injury or death.
Remove battery before performing any maintenance.
Clean the housing with a damp cloth and mild detergent
after every use. Allow tool to dry completely before
replacing battery.
Do not attempt to open the tool. It contains no user-
serviceable parts.
Optional Equipment and Repair
Parts
Repair Kits
CAT #
BTC3-CK
BTC3GL REMOTE CONTROL, BHT CONTROL
BTC3-TJ
52177 BATTERY, 18V LI ION 2.0AH(PKG)
52178 CHARGER, BATTERY 120V (PKGD)
52179 CHARGER, BATTERY 230V (PKGD)
52180 CHARGER, BATTERY 12V (PKGD)
CP1
ES20LXR
Description
BHT CONV KIT
HOT STICK ADAPTER
POUCH (PKGD)
19