General Approvals - Siemens SCALANCE S615 Operating Instructions Manual

Approvals

10.3 General approvals

10.3 General approvals
ATEX, IECEx, UKEX and CCC Ex certification
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support
Enter the document identification number "C234" as the search term.
The markings of the electrical devices are:
The products meet the requirements of the following standards:
• EN/IEC 60079-7, GB 3836.8
• EN IEC/IEC 60079-0, GB 3836.1
You will find the current versions of the standards in the currently valid certificates.
Note for Australia - RCM
The product meets the requirements of the RCM standard.
Applied standards:
• EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
76
WARNING
(https://support.industry.siemens.com/cs/ww/en/view/78381013).
II 3 G Ex ec IIC T4 Gc
DEKRA 18ATEX0025 X
DEKRA 21UKEX0001 X
IECEx DEK 18.0017X
Importer UK:
Siemens plc,
Manchester
M20 2UR
(Ex na IIC T4 Gc, not on the nameplate)
Operating Instructions, 10/2022, C79000-G8976-C389-07
SCALANCE S615