Fujitsu AUXG18KVLA Service Manual page 200

7. Press the
/
ted from the indoor unit or the IR receiver when the signal is received correctly. If wrong code is
set, no beep sound will be emitted.
NOTE: Press
button within 30 seconds after pressing MODE button.
/
For the function details, refer to
8. Exit the function setting mode by pressing the RESET button.
1-5. Indoor unit (setting by wireless remote controller)
button once to transmit the function setting information. 1 short beep will be emit-
Chapter 1-8. "Function details"
1 short beep
RESET
- (05-14) -
on page 05-27.
1. Function settings