Lorex mCAM DMC2161 Installation Instructions page 2

On microsoft windows vista operating system

Hide thumbs Also See for mCAM DMC2161:

3. Click the 'Browse' button to select the Driver

Location. This will typically be either the CD

ROM drive, or the location where you saved

the "DVS Driver for Vista" (.after downloading

from the website)

4. You will get a status message indicating that

the installation was successful. Click the

'Close' button to exit the Update Window.

5. If prompted with the 'Found New Hardware'

window, select the option 'Don't show this

message again for this device'. The Window

will close after selecting this option.

NOTE: You will see a yellow exclamation mark

near the audio device on the Device Manager

screen. This indicates that the audio from the

camera is not active.

6. Launch the mCam application by clicking Start / Programs / Lorex mCam)

www.lorexcctv.com