Download Print this page

Lorex mCAM DMC2161 Installation Instructions

On microsoft windows vista operating system
Hide thumbs Also See for mCAM DMC2161:

Advertisement

Quick Links

Installation instructions on Microsoft Windows Vista Operating System
Lorex mCam software version 2.0.1 and above is compatible with Microsoft Windows
Vista™ Operating System.
The Video Driver for DMC2161 has been upgraded to work on Windows Vista and a dedicated
driver directory "DVS Driver for Vista" is included on your installation CD and posted to the
Lorex website (www.lorexcctv.com/support).
While Lorex is continuing its efforts to upgrade the audio driver of the DMC2161 camera to work
in a Windows Vista environment, mCam software does support audio using any external audio
device (e.g. microphone) that is compatible with Windows Vista. Please note that both video
and audio are fully supported in Windows XP.
If during your installation on a Microsoft Windows Vista Operating System you get a message
that your driver was not successfully installed
Please follow the steps below to complete the installation:
1. Open the Device Manager:
Click Start / Settings / Control Panel / Device Manager
Click the 'Continue' Button on the 'Microsoft Management Console' window to
continue. The Device Manager window will open.
A list of all System Devices will be displayed. Right Click on the "DVS Composite
Device" listed under Universal
Serial Bus Controls, and select
"Update Driver Software"
NOTE: If the device is not
displayed, click on the '+' beside
the Universal Serial Bus
Controllers option.
2.
Browse for the Driver location
Copyright © 2007 Lorex Technology Inc.
DMC2161
OR
www.lorexcctv.com

Advertisement

loading

Summary of Contents for Lorex mCAM DMC2161

  • Page 1 “DVS Driver for Vista” is included on your installation CD and posted to the Lorex website (www.lorexcctv.com/support). While Lorex is continuing its efforts to upgrade the audio driver of the DMC2161 camera to work in a Windows Vista environment, mCam software does support audio using any external audio device (e.g.
  • Page 2 Device Manager screen. This indicates that the audio from the camera is not active. 6. Launch the mCam application by clicking Start / Programs / Lorex mCam) Copyright © 2007 Lorex Technology Inc. www.lorexcctv.com...