Viewing Mode - Lorex LW2101 Instruction Manual

Viewing Mode

Viewing Mode
1. SIGNAL INDICATOR – The
signal indicator shows the strength
of the signal being received from the
camera.
The number of bars in the Signal
Indicator shows the strength of the
signal – One or No Bars indicates
the signal is poor, and 4 bars
indicate a very strong signal.
Signal Indicators:
Signal Strength Indicator
Perfect
Good
Fair
Low
No Signal
2. CHANNEL INDICATOR – Displays the current channel
number. Press the CAM Button on the Receiver to switch
between available cameras
NOTE: To automatically switch between channels, configure
the Auto Scan settings in Menu Mode.
3. ZOOM INDICATOR – Press the ZOOM Button on the
Receiver to go into ZOOM IN Mode (QVGA Mode ONLY).
12
1 2
Data Rate VGA Frames
1062~1280 Kbps 5~10 FPS
725~1062 Kbps 3~5 FPS
543~725 Kbps 2~4 FPS
250~543 Kbps 0~1 FPS
Under 250Kbps 0 FPS
3 4
ZOOM
QVGA Frames
15~30 FPS
12~20 FPS
8~15 FPS
0~4 FPS
0 FPS