Lorex LW2002BAC1 Quick Start Manual

Contents:
Digital Wireless Color
Camera with Stand
LW2002BAC1 (black)

InstALLAtIon WARnInGs

• Aim the Cameras to best optimize the
viewing area: Select a location for the
camera that provides a clear view of the
area you want to monitor, which is free
from dust, and is not in line-of-sight to a
strong light source or direct sunlight.
• Avoid installing the cameras where there
are thick walls, obstructions, or
interference (i.e. transformers, microwave
ovens or other electrical equipment)
between the Cameras and the Receiver.
• Select a location for the camera that
has an ambient temperature between
14°F~113°F (-10°C~45°C)
• Before starting permanent installation,
have another person hold the camera
for you while you verify its performance
by observing the image on a monitor.
nIGHt VIsIon
This camera includes IR LEDs, which
provide the camera with the ability to
view images in low light conditions. It
is important to use the provided power
adaptor (and not the Battery Pack
Adaptor) when using the camera for
prolonged periods in low light condi-
tions, as the LEDs will drain the battery
more quickly than regular daytime use.
PORTABLE COLOR LCD DIGITAL WIRELESS
CAMERAS (BLACK OR WHITE)
LW2002AC1 SERIES - QuICK START GuIDE
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adaptor.
oR
Digital Wireless Color
Camera with Stand
LW2002WAC1 (white)
1. InstALLInG tHe CAMeRA
Camera Positioning: The Camera
can be placed on a flat surface, or wall
mounted. The versatile stand allows for
several different mounting options.
Desk/Counter Mount
oPtIonAL
Wall Mounting: Mark the position of the
screw holes on the wall.
• Drill holes and insert 2 screws.
• Firmly attach the camera to the wall by
placing the stand over the installed
screws and pushing the base
downwards to secure.
www.lorexcctv.com
Power Adaptor
for camera
Wall Mount
screws. Slide the base downwards.
LW2002AC1 SERIES QSG_EN_R1 Page 1
Quick Start Guide
NOTE: AVOID INSTALLING IN
A LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
Position the Base holes over the