Wifi Connection - Uniden App Cam Pano Series Quick Start Manual

WiFi Connection

Here is the steps on how to connect the camera to a WiFi network. If the WiFi was setup in the
initialisation stage, remove the Ethernet cable wait for a moment for the camera to reconnect to the
network.
Note: If this device cannot connect to the WiFi after you remove the Ethernet cable, connect the camera to the router
again with the Ethernet cable and check the network settings.
Log in to the camera,
and enter the Device
Settings > Network
interface.
10
Select the Network,
input the password,
and click Save.
Remove the Ethernet
cable between the
camera and the router
and wait for a moment.
The camera will con-
nect to the Wi-Fi.