Step 3 - Connect Camera To Wifi Router - Uniden APPCAM PAN/TILT User Manual

6. Tap the screen image. The Modify Security Code
prompt displays. Change the security code and tap
Confirm.
7. Tap the screen display again to display the live video screen.

STEP 3 - CONNECT CAMERA TO WIFI ROUTER

1. Tap the Back icon, the System icon, and
then the System Settings icon. The System
Information screen displays.
2. Tap Advanced. Enter the Admin password (123456).
3. Scroll to WiFi on the Advanced Settings list.
Tap SSID. Select your router from the drop-
down list and enter your router's password.
Tap Connect.
Your camera will reboot and reconnect
to the router. Wait until the camera runs
through its Pan/Tilt self check and the LED
returns to the steady on state to continue.
4. If the screen indicates that the camera is
disconnected, tap the System icon and then
the Refresh icon. The camera refreshes and
reconnects to the router you chose.
5. Tap the screen to display video.
10