Printing Shift Code - Hitachi UX2 Instruction Manual

Chapter 6. Character Print

6.3. Printing Shift Code

This section describes operation of printing shift code.
(1) Overview
● Divides one day into multiple work shifts and prints a different code for each work shift.
(See "(2) Operation" for the shift code setup procedure for this example.)
● Only one shift code can be set in one message. Each code can contain up to ten digits.
● Shift code rules are set on the [Shift code] setup screen.
● For a work shift, set the start time in units of hour/minute. Up to 48 shifts can be specified.
● One shift code rule is held for each message. To input the same shift code rule to another message, use the
"copy" and "paste" functions. Input the shift code rule, press Copy to copy, and press Paste on the [Shift
code] setup screen of another message.
● A shift code cannot be input to the calendar block of another calendar.
6-16
Example of dividing a day into three work shifts
No. Range
1 0:30 to 8:14
2 8:15 to 16:44
3 16:45 to 0:29
Printing result
A1
A2
A3