Table of Contents
Advertisement
Power cooling, power heating
operation
It can be set when cooling or heating is set as
the operation mode.
1
9/─
Press the
button.
- When cooling is selected as the operation
mode, the power cooling operation will
be activated.
- When heating is selected as the
operation mode, the power heating
operation will be activated.
2
When you press the
power cooling or power heating function
will be turned off.
Adjusting the air speed
You can adjust the air speed from the air
outlet.
1
Turn on the air conditioner by pressing the
|
button on the remote control.
2
Select the desired air speed by repeatedly
R
pressing the
button.
- You can select the fan speed in four
steps low, mid, high, super high. Each
time the button is pressed, the fan speed
mode is shifted.
- Air speed stages may vary depending on
the model.
- Air flow rate can be selected during the
cooling, dehumidification, blowing, and
auto operation mode.
Timer
Setting the Current Time
Y
1
Press
button for 3 seconds.
c
d
2
Press
or
button until the desired
time is set.
- If you press down and hold the button for
a long time, the time will change more
quickly in 10 minute increments.
3
Press SET/CLEAR button.
9/─
again, the
OPERATING INSTRUCTIONS
NOTE
Check the indicator for A.M. and P.M.
Setting the On Timer
1
Press ON button to turn the timer on or
off.
c
d
2
Press
or
button until the desired
time is set.
3
Press SET/CLEAR button.
Setting the Off Timer
1
Press OFF button to turn the timer on or
off.
c
d
2
Press
or
button until the desired
time is set.
3
Press SET/CLEAR button.
Canceling the Timer Setting
You can cancel all timer settings.
Q
- Press
button.
NOTE
• If you wish to cancel a specific timer
setting, press the each timer button to
turn on or off the Sleep Timer, On
Timer, or Off Timer as you want. Then
Q
press the
button while aiming the
remote controller at the signal receptor.
• The timer lamp on the air conditioner
and the display will go off.
17
Advertisement
Table of Contents
