Setup Wizard Instructions For Windows 98Se, Me, And 2000 - Linksys WPC54G User Manual

Setup Wizard Instructions for Windows 98SE, Me, and 2000

1. To install the Adapter, click the Install button on the Welcome screen,
Figure 4-1. Click User Guide to view the User Guide or click Exit to exit
the Setup Wizard.
2. Read the License Agreement and click the Next button to continue the
installation. If you click the Cancel button, you will end the installation.
6
Instant Wireless
Figure 4-2
Series Wireless-G Notebook Adapter
®
3. The Setup Wizard will ask you to choose a wireless mode. (See Figure 4-
3.) Click the Infrastructure Mode radio button if you want your wireless
computers to network with computers on your wired network using a wire-
less access point. Click the Ad-Hoc Mode radio button if you want multi-
ple wireless computers to network directly with each other. Do not use the
Ad-Hoc mode if you want your wireless computers to communicate with
computers on your wired network.
In the SSID field, enter the SSID (Service Set Identifier) of your wireless
network. The SSID is your network name and must be identical for all
devices in the network. The default setting is linksys (all lowercase). Click
the Next button to continue, or click the Back button to return to the previ-
ous page.
Figure 4-3
7