Table of Contents
Advertisement
Securing Wall Hanging Racks (TRC)
WARNING
ANALYSIS OF THE WALL AND APPROPRIATE HANGING METHODS BEFORE ATTEMPTING TO HANG THE
TRS SYSTEM. FAILURE TO COMPLY WITH THE ABOVE REQUIREMENT COULD RESULT IN SUBSTANTIAL
PROPERTY DAMAGE, SEVERE PERSONAL INJURY OR DEATH.
•
Identify the installation location and confirm that the installation will meet all required clearances.
•
In the event of a conflict or inconsistency between items indicated in this manual regarding code requirements,
the more stringent standard shall prevail.
TRC02
1. Using the holes in the wall hanging brackets, Secure-
ly attach the brackets level to the wall. Ensure that
the attachment strength is sufficient. Brackets are to
be installed within 1/2" from the corner.
2. Lift the corner hanging rack , and insert the top of
the frame into the two brackets.
3. Secure the frame to the hanging brackets using two,
12-14 Thread, 2-1/2" long, drill point screws (Supplied).
Fastener head is 5/16" hex.
THE WALL MUST BE CABABLE OF CARRYING THE OPERATING WEIGHT OF THE
INSTALLED TRS SYSTEM. CONSULT A STRUCTURAL ENGINEER FOR STRUCTURAL
33
Rinnai Rack Installation
Advertisement
Table of Contents
