Securing Wall Hanging Racks (Trw) - Rinnai SE Series Installation Manual

Securing Wall Hanging Racks (TRW)

WARNING
ANALYSIS OF THE WALL AND APPROPRIATE HANGING METHODS BEFORE ATTEMPTING TO HANG THE
TRS SYSTEM. FAILURE TO COMPLY WITH THE ABOVE REQUIREMENT COULD RESULT IN SUBSTANTIAL
PROPERTY DAMAGE, SEVERE PERSONAL INJURY OR DEATH.
•
Identify the installation location and confirm that the installation will meet all required clearances.
•
In the event of a conflict or inconsistency between items indicated in this manual regarding code requirements,
the more stringent standard shall prevail.
TRW02, TRW03, TRW23, TRW02SE, TRW02ST, TRW03ST
1. Using the holes in the wall hanging bracket, Securely
attach the bracket level to the wall. Ensure that the
attachment strength is sufficient.
2. Lift the wall hanging rack , and insert the top of the
frame into the bracket.
3. Secure the front of the bracket to the front of the wall
hanging frame with a #12 X 3/4 drill point screw.
THE WALL MUST BE CABABLE OF CARRYING THE OPERATING WEIGHT OF THE
INSTALLED TRS SYSTEM. CONSULT A STRUCTURAL ENGINEER FOR STRUCTURAL
32 Rinnai Rack Installation