Figure 5-2: Connection To Your Tv And Stereo - Linksys WMA11B User Manual

Wireless-B Media Adapter
Connecting to Your TV and Stereo

Figure 5-2: Connection to Your TV and Stereo

1. Refer to the connection diagram in Figure 5-2. If your TV has an S-video input, then connect the S-video cable
to the Adapter's S-video port and the TV's S-VIDEO IN port.
If your TV does NOT have an S-video input, then connect the yellow connectors of the RCA cable to the
Adapter's Video port and the TV's VIDEO IN port.
Note: If your TV and stereo are located far apart from each other, you may have to use a separate
RCA cable for the audio connections described in step 2.
2. Connect the red and white connectors of the RCA cable to the Adapter's Left and Right ports and the stereo's
AUDIO IN ports.
3. Power on your TV. Select the TV channel or input that the Adapter will use.
4. Power on your stereo, and select the stereo input that the Adapter will use.
5. Proceed to the "Connecting the Adapter to Your Network" section.
Chapter 5: Connecting the Wireless-B Media Adapter to Your TV and Stereo
Instructions
19