Subaru BRZ 2022 Getting Started Manual page 76

EYESIGHT
Conventional Cruise Control
Conventional Cruise Control maintains a
constant traveling speed you set, but it does
not adapt to the other vehicles in front of you.
60
MPH
To activate Conventional Cruise Control, press
the Adaptive Cruise Control On/Off button to
set Adaptive Cruise Control into standby
status. Then, with Adaptive Cruise Control in
standby status, press and hold the Following
Distance Button on the steering wheel for
approximately two seconds.
The Cruise Control indicator on the
Combination Meter Display (CMD) will change
from the Adaptive Cruise Control icon to the
Conventional Cruise Control icon, and the
"READY" indicator appears when all operational conditions are met. Use the accelerator to
reach the desired speed, then push the Cruise Control lever to the "+ RES" or the "– SET"
side to set the vehicle speed.
Lead Vehicle Start Alert
This function will provide a visual and audible
Vehicle Ahead
alert when a stopped vehicle in front of you
begins to move, and your vehicle remains
Has Moved
stationary. Warnings are displayed in the
Combination Meter Display (CMD) with
audible beeps. Lead Vehicle Start Alert is
helpful in situations where you may become
temporarily distracted at a traffic light, and the
vehicle ahead begins to move.
Navigate the CID (select "Settings", then the
®
"Car" menu) to access the EyeSight settings
menu to turn this function on or off.
74