Brother CS8000 Series Service Manual page 121

Modules
1
Shaft bushing assembly attachment
1. Attach the shaft bushing assy. 1 to the upper unit holder using screws 1
(two).
Start movie clip (CD-ROM version only)
1
2
Thread take-up lever link assembly
1. Attach the shaft 1, spring
upper unit holder, and attach retaining ring E4.
2. Install screw 1 in the shaft 1.
Apply Molykote EM 30L grease all the way around
the shaft hole in the thread take-up lever link.
Start movie clip (CD-ROM version only)
1
S06
Needle-presser module
Set Screw, Socke
M3X5
Color; Bla
Aand thread take-up lever link 2 to the
S06
Set Screw, Socket (CP)
M3X5
Color; Black
20.7
5.2
www.promelectroavtomat.ru
Torque
−
1.18 – 1.57 N m
1
Small amount
Torque
−
0.49 N m
SPRING
XC2441***
1
1
1 1
Retaining ring E4
S06
3 - 49