Chapter 5: Setting Up The Wireless-G Exterior Access Point; Setup Wizard; Figure 5-1: Setup Wizard's Welcome Screen - Linksys WAP54GPE User Manual

Wireless-G Exterior Access Point

Chapter 5: Setting Up the Wireless-G Exterior Access Point

Setup Wizard

Now that you've connected the Access Point to your wired network, you are ready to begin setting it up. This
Setup Wizard will take you through all the steps necessary to configure the Access Point.
1. Insert the Setup Wizard CD into your PC's CD-ROM drive. Your PC must be on your wired network to set up the
Access Point.
2. The Setup Wizard's Welcome screen should appear on your monitor. If it does not, then click the Start button
and select Run. In the field provided, enter D:\setup.exe (if "D" is the letter of your PC's CD-ROM drive).
Click the Setup button to proceed with this Setup Wizard. Clicking the User Guide button opened this Guide.
To exit this Setup Wizard, click the Exit button.
Chapter 5: Setting Up the Wireless-G Exterior Access Point
Setup Wizard

Figure 5-1: Setup Wizard's Welcome Screen

10