Philips Sonicare Plaque Defence 2 Series Manual page 24

ENGLISH
6 Charger
Note: The contents of the box may vary based on model purchased.
Getting started
Attaching the brush head
1 Align the brush head so the bristles face the front of the
handle (Fig. 2).
2 Firmly press the brush head down on the metal shaft until it stops.
Note: Sonicare brush heads come with easily identifiable icons to identify your
brush head.
Charging your Sonicare
1 Plug the charger into a live electrical outlet.
2 Place the handle on the charger (Fig. 3).
The battery level indicator flashes to indicate that the toothbrush
,
is charging (Fig. 4).
Note: It can take up to 48 hours to fully charge the battery, but the Sonicare
may be used before it is fully charged.
Using your Sonicare
Brushing instructions
1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
towards the gumline (Fig. 5).
3 Press the power on/off button to turn on the Sonicare.
4 Apply light pressure to maximize Sonicare's effectiveness and let
the Sonicare toothbrush do the brushing for you. Do not scrub.
5 Gently move the brush head slowly across the teeth in a small back
and forth motion so the longer bristles reach between the teeth.
Continue this motion throughout the brushing cycle.
PlaqueDefense_EN_A6_CS6new.indd 23
23
14/05/15 10:5