Advertisement
Installing the Clutch Shield
1. Using the clutch shield as the template, drill 4 holes
(4.8 mm (3/16 inch) in diameter) into the engine tray
(Figure 3).
1. Engine tray
2. Align the clutch shield with the 4 holes in the engine
tray.
3. Secure the clutch shield to the engine tray with 4 tek
screws (1/4 inch) as shown in Figure 4.
1. Engine tray
2. Clutch shield
Figure 3
2. Clutch shield
Figure 4
3. Tek screws (1/4 inch)
2
Advertisement
