Product Data - Linksys SPA3000 Product Data

PRODUCT DATA

SPA3000
Model No.
Features
Telephony
• VoIP to PSTN (USA) Service Call Origination and Termination
• PSTN (USA) to VoIP Service Call Origination and Termination
• Single or Dual Stage Dialing
• Service Authentication via PIN, Digest, Caller ID (Bellcore Type 1)
• Per Call Authentication and Associated Routing
• Least Cost Routing Support
• Impedance Agnostics - 8 Settings
• Call Waiting, Cancel Call Waiting, Call Waiting Caller ID Detection (Bellcore Type 1)
• Caller ID with Name/Number (Multi-national Variants)
• Caller ID Blocking
• Call Forwarding to PSTN or VoIP Service: No answer, Busy, All
• Do Not Disturb
• Call Transfer
• Three-way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return
• Call Back on Busy
• Call Blocking with Toll Restriction
• Delayed Disconnect
• Distinctive Ringing - Calling and Called Number
• Off-hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold
SPA3000 Specific
• Forward Calls to VoIP service - Selective, Authenticated, All
• Forward Calls to PSTN service - Selective, Authenticated, All
• PSTN Line Sharing with Multiple Extensions
• Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
• Advanced Inbound and Outbound Call Routing
• Single Stage and Two Stage Dialing
• Independent Configurable Dial Plans - Up to 8
• Force PSTN Disconnection
• Sequential Dialing Support
VoIP to PSTN Authentication and Routing
• VoIP to PSTN Gateway Enable/Disable
• VoIP Caller Auth Method (None, PIN, HTTP Digest)
• VoIP PIN Max Retry Setting
• One Stage Dialing Enable/Disable
• VoIP Caller ID Pattern Matching
• VoIP Access Allowed Caller List (No Further Authentication)
• VoIP Caller PIN and Associated Dial Plan
PSTN to VoIP Authentication and Features
• PSTN to VoIP Gateway Enable/Disable
• Caller Auth Method: None, PIN, Caller ID
• Ring Through to FXS Enable/Disable
• Ring Through Tone - Configurable
• Caller ID (Bellcore 1) for VoIP Service Access
• Caller ID Enable/Disable
• PIN Max Retry Settings
• Access Allowed Caller List (No Further Authentication)
• Caller PIN and Associated Dial Plan
• Least Cost Routing (via Outbound VoIP - Line1 Dial Plan)