Linksys SPA 3102 Configuration Manual

Linksys Cisco FXO adapter SPA 3102 Configuration guide
Cable connection
Step 1: connect your phone cable to the "PHONE" port.
Step 2: connect your LAN cable to the "INTERNET" port. We assume a DHCP server is already running on
your LAN. If not, after step 3 jump to "Static IP configuration"
Step 3: power up the adapter
IP address detection and web management
On your phone
press **** (star key 4 time)
–
press 110# and take note of the annouced IP address. Let's call it "ip_address"
–
press 7932#
–
open a web browser to the URL: http://ip_address/admin/advanced
–
1# 1 (it's needed to enable web management on the internet port)
Cluana
Leave the "LINE" port disconnected.